音響的主動分音又叫主動分頻，是主機的音頻信號在經功放電路放大前在主機處理器里進行分頻。原理是音頻信號到主機處理器(CPU)，在主機處理器里音頻信號按照頻響范圍分為低頻信號和高頻信號，再把分好的兩路信號各自輸入到放大電路里，單獨放大。其分頻方式是數字式的。
Active audio division, also known as active frequency division, is that the audio signal of the host is divided in the host processor before being amplified by the power amplifier circuit. The principle is that the audio signal is sent to the host processor (CPU). In the host processor, the audio signal is divided into low-frequency signal and high-frequency signal according to the frequency response range, and then the divided two signals are respectively input into the amplification circuit for separate amplification. Its frequency division mode is digital.
被動分音也叫被動分頻，是音頻信號經功放電路放大后再由被動分頻器分頻，分別輸入到相應的高音或低音喇叭上。原理是由電感電路濾掉高頻聲音，剩下低頻聲音，再把低頻聲音輸入給低拼喇叭。由電解電容濾掉低頻聲音剩下高頻聲音，再輸入給高音喇叭。其分頻方式是由可變電阻調整模糊式的。
Passive frequency division is also called passive frequency division. After the audio signal is amplified by the power amplifier circuit, it is divided by the passive frequency divider and input to the corresponding tweeter or bass speaker respectively. The principle is that the inductive circuit filters out the high-frequency sound, leaves the low-frequency sound, and then inputs the low-frequency sound to the low-frequency horn. The low-frequency sound is filtered out by the electrolytic capacitor, and the remaining high-frequency sound is input to the tweeter. The frequency division mode is fuzzy adjusted by variable resistance.
主動分音必 須是主機帶主動分頻功能或在主機音頻輸出后加裝數字式主動分頻器。
Active frequency division must be provided by the host with active frequency division function or a digital active frequency divider shall be installed after the audio output of the host.
主動式喇叭其實很多人都用過，那些隨身聽的小喇叭就是主動式喇叭，也就是一般的喇叭箱中再加裝一組擴大機，當我們要用的時候僅需前級而不需后級。主動式內部采用電子分音方式，并且省去搭配合適的后級的困擾;被動式喇叭就是一般的喇叭，里面只有一分音網絡。
In fact, many people have used active speakers. Those small Walkman speakers are active speakers, that is, a group of expanders are added to the general speaker box. When we want to use them, we only need the front stage instead of the rear stage. The active internal use of electronic sound splitting, and save the trouble of matching the appropriate later stage; Passive loudspeaker is a general loudspeaker, which has only a sound distribution network.
主動式前級就是我們一般所見之IC、晶體管、真空管之前級，輸入信號之后再輸出時有放大作用，這種前級較能發揮高動態的表現，隨著各機種之特性也有不同的音色。而被動式的前級說穿了簡單，就是一個音量控制的衰減器，其輸出會小于輸入，但音色渲染的情形較少，通常只有輕微的差異，不致像主動式的前級擴大機差異相當大。
The active front stage is the front stage of IC, transistor and vacuum tube. It can amplify the input signal and then output. This front stage can give full play to high dynamic performance, and has different timbres with the characteristics of various models. The passive front stage is simply a volume controlled attenuator, whose output will be less than the input, but there are few cases of timbre rendering, usually only a slight difference, which is not like the active front stage amplifier, and the difference is quite large.
魯公網安備 37010202002516號
