在舞臺燈光調試過程中，常會遇到燈光鋪設不均勻、燈光失控等問題，現結合我們多年的從業經驗，把經常遇到的問題做了匯總并提供常規的解決辦法，下面
山東舞臺燈光廠家為您分析。
In the process of stage lighting debugging, we often encounter problems such as uneven lighting laying and out of control lighting. Now, combined with our years of experience, we have summarized the problems we often encounter and provided conventional solutions. The Shandong stage lighting manufacturer will analyze them for you.
1、燈光鋪設不均
1. Uneven lighting
在舞臺布光時，燈具數量明明很多，布置的燈光總有陰影區，鋪設不均勻。主要有三種起因：一，燈排數過少燈具擺放分布不均勻；二燈具光束角度過小；三，燈具位置過低。
During stage lighting, the number of lamps and lanterns is obviously large, and the lighting arrangement always has a shadow area, which is uneven. There are three main causes: first, the number of lamp rows is too small, and the lamps are unevenly placed; 2 The beam angle of the lamp is too small; 3、 The lamp position is too low.
解決辦法
terms of settlement
1、在設計時要明確清楚舞臺尺寸及舞臺上方燈具可擺放位置的高度；
1. During the design, the size of the stage and the height at which the lamps can be placed above the stage shall be clearly defined;
2、根據舞臺照度及效果需求，選擇合適的光束角度的燈具；
2. According to the requirements of stage illumination and effect, choose the lamps with appropriate beam angle;
3、根據舞臺的高度及燈具光束角度距離，計算燈具之間的距離與數量；
3. Calculate the distance and number of lamps according to the height of the stage and the beam angle distance of lamps;
4、后:確實沒法改變燈具位置和光束角度，交叉調節各個燈排上燈具的投射角度，也可達到目的。
4. Rear: It is really impossible to change the lamp position and beam angle, and cross adjust the projection angle of lamps on each lamp row, which can also achieve the goal.
2、舞臺燈具失控
2. Stage lamps out of control
在所有燈光安裝完畢后，燈具撥碼沒有問題，出現燈光失控的問題。主要原因有三個：一，信號控制線路問題；二，電腦燈具的燈庫出現問題；三，不同種類的燈共用一根控制線。
After all the lights are installed, there is no problem with the lamp dialling, and the light is out of control. There are three main reasons: First, the problem of signal control circuit; 2、 There is a problem with the lamp library of computer lamps; 3、 Different types of lamps share one control line.
解決辦法
terms of settlement
1、檢查燈具的撥碼沒有問題；
1. Check that the dial code of the lamp is correct;
2、檢測信號控制線是否斷路；
2. Detect whether the signal control line is open circuit;
3、檢查信號控制線連接頭焊接是否有問題；
3. Check whether there is any problem in the welding of the signal control line connector;
4、一根信號控制線共用燈具數量不宜過多，好一排燈一根控制線；
4. The number of lamps shared by one signal control line shall not be too large, and one control line for each row of lamps shall be provided;
5、信號控制線不宜過長，增加信號分配放大器；
5. The signal control line shall not be too long, and the signal distribution amplifier shall be added;
6、聯系廠家確認燈庫是否正確；
6. Contact the manufacturer to confirm whether the lamp library is correct;
7、一根信號控制線控制同一種燈，盡量不要共用多種不同類型的燈具。
7. One signal control line shall control the same type of lamp, and multiple lamps of different types shall not be shared as much as possible.
The handling of uneven stage lighting and out of control lighting is explained above. You can come to our website at any time if you have any ideas or needs http://www.zkvd.cn Understand!
魯公網安備 37010202002516號
