擁有一套高檔器材是重要的，但正確使用這些器材同樣重要。就目前來說，在一般音響愛好者中，有一些使用上的誤區應該加以避免。下面
山東音響小編為您講解：
It is important to have a set of high-grade equipment, but it is also important to use them correctly. At present, among ordinary audio lovers, there are some misunderstandings in use that should be avoided. Next, Shandong professional audio editor will explain to you:
(一)將器材放進柜里。有人出于裝飾和保護，將器材放進定做的柜子里，這會因柜內空間所引起的潛振使音色渾濁，功放等器材由于沒有足夠的流通空氣，易過熱、老化。如把音箱裝入墻壁，會使聲音效果變得生硬。
（1） Put the equipment in the cabinet. Some people put the equipment into the customized cabinet for decoration and protection, which will make the sound turbid due to the potential vibration caused by the space in the cabinet. The power amplifier and other equipment are easy to overheat and aging due to insufficient air circulation. If the speaker is installed on the wall, the sound effect will become stiff.
(二)疊放器材。很多人愛將影碟機、放大器、調諧器、數碼模擬轉換器等機器重疊放置，這會引起互相干擾，尤其是鐳攝機與功放干擾嚴重，會使音色偏硬及產生壓抑感。正確的做法是將器材放在由廠方設計的音響架上。
（2） Stack equipment. Many people like to overlap the video player, amplifier, tuner, digital analog converter and other machines, which will cause mutual interference, especially the serious interference between the laser camera and the power amplifier, which will make the voice hard and produce a sense of depression. The correct way is to put the equipment on the sound rack designed by the manufacturer.
(三)電源插頭正負不分。電源插頭正負處理的好的系統，音色層次分明，自然順暢;正負不一致或參差不齊，音色會偏硬粗糙。
（3） The power plug is positive and negative. A good system of positive and negative processing of power plug, with clear and smooth tone; The positive and negative are inconsistent or uneven, and the tone will be hard and rough.
(四)接線不牢與不潔。如果系統音色干硬，其中一個原因可能是接觸不良，如插頭不牢、接觸面氧化、沾上灰塵或油污等，所以應該經常檢查，保持接觸面清潔。
（4） Loose and dirty wiring. If the sound of the system is dry and hard, one of the reasons may be poor contact, such as loose plug, oxidation of contact surface, dust or oil stain, etc. Therefore, it should be checked frequently to keep the contact surface clean.
(五)音箱的擺放“因地制宜”。有人因室內先有了其他家具，而將音箱擺放位置遷就家具。正確的應先決定聆聽距離，然后將音箱擺到座位與對面墻間的1/3處，音箱的間距為聆聽者與音箱直接距離的0.7倍，高度以聆聽者耳朵和高音單元齊平為好。
（5） The placement of speakers should be "adapted to local conditions". Someone moved the location of speakers to furniture because of other furniture in the room. To be correct, first determine the listening distance, and then place the speaker at 1/3 of the distance between the seat and the opposite wall. The distance between the speakers is 0.7 times the direct distance between the listener and the speaker, and the height should be the same as the listener's ear and the tweeter.
(六)接線處理不當。處理接線時不可把電源線與信號線扎在一起，因交流電會影響信號;信號線或喇叭線均不能打結，否則會影響音色;信號線或喇叭線過長可改短。許多信號線都有方向性，不要弄錯。
（6） Improper wiring. Do not tie the power line and the signal line together when processing the wiring, because AC will affect the signal; The signal line or horn line shall not be knotted, otherwise the timbre will be affected; The signal line or horn line can be shortened if it is too long. Many signal lines are directional. Don't make mistakes.
(七)想當然處理房間音響效果。除了明音、隔音，更重要的是音波反射、折射的處理，這需要考慮房間的體積、尺寸、堅固程度、材料的運用等，如不是行家，即便將房間的裝飾得豪華美觀，音響也難以達到很好的效果。
（7） Take it for granted to deal with room acoustics. In addition to clear sound and sound insulation, the more important thing is the treatment of sound wave reflection and refraction. This needs to consider the volume, size, firmness, material use, etc. of the room. If you are not an expert, even if you decorate the room luxuriously and beautifully, it is difficult for the sound to achieve good results.
(八)自欺欺人。如器材播放某類音樂會效果很好，而播放另一類音樂則不理想，這說明系統還未達到理想程度，需要多學、多聽、多觀察，從而加以改進。
（8） Deceive yourself. For example, the effect of playing one kind of music is very good, while playing another kind of music is not ideal, which means that the system has not reached the ideal level, and needs to learn, listen and observe more, so as to improve it.
This is how to avoid some mistakes in the use of audio. If you have any doubts or needs about this, please come to our website http://www.zkvd.cn Ask about it!
魯公網安備 37010202002516號
