国产亚洲精品a在线观看app,国产精品一二三区久久狼,女人与公豬交交30分钟视频,日本熟熟妇XXXXX精品熟妇

Vibration has an effect on sound playing. Vibration can also be avoided. What we need to do now is how to avoid shock! Follow Shandong professional audio to have a look!

腳釘、腳架等都是利用適當的介質和幾何形狀，將音響器材外殼與承載體的接觸面減少到小，造就一個聲學高阻抗區，使產生隔離作用，或者說是將音響系統的振動”機械接地”。

The foot pin and the foot stand make use of the appropriate medium and geometry to reduce the contact surface between the sound equipment shell and the bearing body to a small size, creating a high acoustic impedance area, so as to isolate the sound system, or to "mechanically ground" the vibration of the sound system.

硬質角錐腳釘除可將器材本身的振動導出,還能把器材與外界的振動阻隔，使音響器材內部及外部振動對音質的影響得以減小。一個有用的避震腳釘一定在傳導振動的同時，將振動的機械能轉換成熱 能散發掉。不同材料制作的角錐腳釘都有其固定的諧振頻率,各具優缺點，這在使用時是應加考慮的。

In addition to leading out the vibration of the equipment itself, the rigid pyramid pin can also block the vibration of the equipment from the outside, so that the influence of the internal and external vibration of the audio equipment on the sound quality can be reduced. A useful Shockproof foot pin must transmit vibration and at the same time convert the mechanical energy of vibration into heat energy. The corner pin made of different materials has its fixed resonant frequency, and each has its own advantages and disadvantages, which should be considered in use.

吸震墊用以吸收器材的振動，因材料不同可分發殺墊、橡膠墊、塑料墊、絨毛墊等，為取得好的吸震效果，應選擇能吸收造成主要干擾頻率段的吸震墊,同時要對可聞頻率以下的超低頻(10Hz以下)予以吸收，以改 善聲音的清晰度。不同材料制作的吸震墊對振動傳導的頻率及傳導速率均不同，這是選用的關鍵。如以厚重的石料作底,再在其上放以軟質吸震膠墊,就能有更好效果。

The shock absorbing pad is used to absorb the vibration of the equipment. Due to different materials, it can be used as killing pad, rubber pad, plastic pad, pile pad, etc. in order to achieve good shock absorption effect, the shock absorbing pad that can absorb the main interference frequency band should be selected. At the same time, the ultra-low frequency (below 10Hz) below the audible frequency should be absorbed to improve the clarity of the sound. The frequency and velocity of vibration transmission of different materials are different, which is the key of selection. If the thick stone is used as the base, and then the soft shock absorbing rubber pad is put on it, the effect will be better.

角錐和吸震墊組合使用，可兼收兩者之長,硬質的角錐使振動得到有用傳導，當振動傳導吸震墊時,由于高阻尼夾層材料分子間相互碰撞而將振動的機械能轉化為熱 能,振動的能 量便不會積聚在錐體附近，而且利用不同材料具有不同的共振頻率，對不同頻率有不同阻尼特性，使這種組合能具有一個較寬頻帶的吸收和阻尼，從而收到更佳效果。

When the vibration is transmitted to the shock absorbing pad, the mechanical energy of vibration will be converted into heat energy due to the collision between molecules of high damping sandwich materials, and the vibration energy will not accumulate near the cone, and different materials have different resonance frequencies, It has different damping characteristics for different frequencies, so that this combination can have a wider band of absorption and damping, and thus achieve better results.

音響器材避震通常可以歸結為兩種，一種是使用質地堅實的木柜或金屬柜放置器材作承架,另一種是利用腳釘、吸震墊或其它東西，將器材與承架，以及承架與地面作隔離。

There are two kinds of shock absorbers for audio equipment. One is to use solid wood cabinet or metal cabinet to place equipment as support frame, and the other is to use foot nails, shock absorbers or other things to isolate equipment from support frame and support frame from ground.

以上就是如何對音響進行避震的方法啦，山東音響提示您并不是所有避震器材都能適合每個音響的，我們也應該結合實際情況進行避震！

The above is how to carry on the shock absorption method to the sound, Shandong professional sound reminds you that not all shock absorption equipment can be suitable for each sound, we should also carry on the shock absorption according to the actual situation!